We are engaged in manufacturing and supplying an exotic range of Blocks. Our range is appreciated for its unmatched quality features, which is matched with the international quality standard. We also offer customized solution for the same in order to meet the specific requirement of our valued clients.
Product Price :Get Latest Price
The V – Blocks have two V – angles of different size to take parts of varying dimensions. By means of the clamp the Work can be held tight in the block. The accuracy of the vee block/100mm is with in 0.005 mm.
Specifications:
Cat No. | L*W*H | Clamping Range |
SH-444 | 050 * 040 * 040mm | 05-30 mm |
SH-445 | 075 * 060 * 060mm | 06-50 mm |
SH-446 | 100 * 080 * 080mm | 06-70 mm |
SH-448 | 070 * 140 * 140mm | 10-125mm |
SH-449 | 150 * 200 * 200mm | 10-150mm |
SH-450 | 200 * 200 * 200mm | 10-200mm |
V–Block can be supplied with 120 Degrees Angle.
Product Price :Get Latest Price
These hardened v blocks come with these special inbuilt features:
‘V’ blocks are hardened and ground to 60+2 HRC
Precision ‘V’ Blocks for tool Room, Inspection Work, Assembly Shop, Marking
All sides precision ground, parallel and square
‘V’ groove ground central and parallel 2 sides and base perfect aligned in matched pair
Supplied with special clamp for holding job
Hold square and round work
Specifications:
Cat No. | Size | Range |
SH- 455 [4”v-b] | 175 100 65 mm | 5-125 mm |
SH- 456 [5”v-b] | 200 125 75 mm | 5-150 mm |
Additional Information:
Product Price :Get Latest Price
SH 451, SH - 452, SH - 453, SH – 454
The 'V' Blocks have two 'V angles of measurements. The clamps help the work top V and the bottom V are parallels with faces and the height variation to the V Block different sizes to take jobs of different to be held rigidly to the 'V block. The +/ - 3 micron and its square ness to the end in pair is w ithin + /- 3 microns.
Specifications:
CAT NO. | Size | Clamping range |
SH – 451 | 63 * 40 * 40 mm | 3 – 25 mm |
SH – 452 | 80 * 57 * 57 mm | 5 – 50 mm |
SH – 453 | 107 * 75 * 75 mm | 5 – 65 mm |
SH – 454 | 150 * 100 * 100 mm | 5 – 85 mm |
Product Price :Get Latest Price
Used for checking heavy and odd shaped round jobs.
Perfectly matched pair having accuracy 0.005 mm
Included angle of rollers is 90°
Standard bearings are used which are replaceable
Jobs don’t get damaged due to bearing on top
Specifications:
Cat No. | Sizes mm. | Range mm. | Load |
| Lx W x H |
| Capacity Kg |
SH - 888 | 150 x 60 x 100 | Ø3- Ø55 | 1,000 |
Special size are available on request
Explore More Products
© Shreepad Industries. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited