Magnetic Chucks

Product Price :Get Latest Price

Introduces Electro-perm Magnetic Chucks for heavy duty milling machine.

These chucks ensure high magnetic and mechanical performance. This chuck is "COLD"

device, as no internal wear or deformation resulting from moving internal parts.

Electro-perm Magnetic Chucks do not consume electrical power except for the very short

period of activation or deactivation of the working surface. Once fixed to the machine table

EPM chucks are as stable as machine.

EPM chucks are economical for operation and maintenance. Magnetic clamping system is

most powerful. Chucks are switched ON & OFF by simple electrical pulse. A variable

output from 20% to 100 % is controlled from push button unit.

In operating condition no power supply is necessary for holding work pieces. So no risk

when power fails.

The de-magnetization cycle of chuck eliminates possible residual magnetism in work

piece, therefore easy release for high alloy steel parts.

EPM chuck is designed for heavy-duty operation such as milling cut of 3 to 6 mm depth at

recommended speed & feed.

Specifications:

Accessories: Capacitor Discharge Type Control Power Unit.

Special sizes are available on request.

Product Price :Get Latest Price

Introduces the Permanent Magnetic Chuck guarantees outstanding performance and reliability. The rigid assembly of these chucks result in accurate grinding or light milling work. The carefully selected pole spacing ensures the maximum possible grip on a wide section of work pieces. Using an additional top plate can accommodate all types, sizes and shapes of work pieces. The magnetic used in these chucks are "NdFeB" type. This magnet is very powerful than "AlNiCo" type. Under ideal conditions the test result shows that the holding power/cu. inch is 55 kg. Which is much higher than "AlNiCo" magnets.

Accuracy as per IS - 4816 - 1971

Specifications:

Product Price :Get Latest Price

• Electro-perm magnetic chuck offers minimum mechanical deformation with solid one piece housing. This chuck is a COLD device.

• These chucks do not consume electrical power only when activation and deactivation of magnets power is required. This results in very less consumption of electricity as compared to conventional electrical chucks.

• EPM chucks are economical for operation and maintenance and also most powerful chucks. These chucks are switched ON and OFF with simple electrical pulse. A variable output from 20% to 100% is controlled from one push button switch.

• EPM chucks are entirely independent of external power supply during the holding of work pieces. So no risk when power fails.

• The demagnetization cycle of EPM chucks reduces possible residual magnetism in the work piece.