Send Email

Send SMS

Home » Products » Magnetic Blocks

Magnetic Blocks

Providing you the best range of magnetic v block, magnetic v blocks, magnetic blocks, magnetic square block in pair, magnetic v block special for boring bar and magnetic square block with effective & timely delivery.

Magnetic V Block

REQUEST CALLBACK

Ask for Price

Product Price :Get Latest Price

MRM – 475, 475 h, 575, 575h, 676, 676h, 856, 856h, 876, 876h, 976, 976h

These magnetic –vee blocks are invaluable and versatile in tool – making and inspection, in quality control and tool – room. Due to their extremely high magnetic power they can be used for drilling and grinding (both wet and dry) and even for light milling work.

The - blocks have a total of three magnetic surfaces. Top and bottom each with 90- degree v – angle and end surface opposite from switch. All three magnetic surfaces as well as the two sides are carefully ground. Their accuracy for flatness, parallelism and square ness is within 0. 005 mm or 0. 0002 inches for all work, which requires accurate positioning.

When turned ‘on ‘ all three magnetic surfaces are activated simultaneously. The permanent magnet holds the work firmly in the v and the block holds itself firmly on a ferrous surface. Coolants or other fluids cannot damage the magnetic system, being shielded from penetration of moisture.

Specifications:

Cat no.	Size	Clamping capacity	Magnetic efficiency
MRM – 475	55 * 50 * 60 mm	5 – 35 mm	50 kg
MRM– 475 h	55 * 50 * 60 mm	5 – 35 mm	50 kg
MRM– 576	75 * 65 * 85 mm	5 – 55 mm	75 kg
MRM– 576 h	75 * 65 * 85 mm	5 – 55 mm	75 kg
MRM– 676	100 * 75 * 95 mm	5 – 65 mm	150 kg
MRM– 676 h	100 * 75 * 95 mm	5 – 65 mm	150 kg
MRM– 856	150 * 85 * 100 mm	8 – 80 mm	250 kg
MRM– 856 h	150 * 85 * 100 mm	8 – 80 mm	250 kg
MRM– 876	150 * 125 * 125 mm	10 – 120 mm	350 kg
MRM– 876 h	150 * 125 * 125 mm	10 – 120 mm	350 kg
MRM– 976	200 * 150 * 150 mm	10 – 150 mm	450 kg
MRM– 976 h	200 * 150 * 150 mm	10 – 150 mm	450 kg

We also manufacture v – blocks in 120-degree angle as per demand. V – Blocks of 60-degree angle are in developing stage.

Yes! I am Interested

Magnetic V Blocks

REQUEST CALLBACK

Ask for Price

Product Price :Get Latest Price

We offer a wide range of magnetic v blocks which finds usage in grinding, light milling, drilling & inspection of round and square jobs. These harden and ground magnetic v block are known for accurate flatness, squareness and parallelism within 0.005 mm up to 6 L & 0.010 mm for 8 L of "V" block. Its bigger V angle & bottom holding surface are equipped with hardened strips for wear resistance. It provides uniform and strong magnetic pull to all three magnetic surfaces top, bottom & V face. Apart from this, the hardness of V face is 60±2 Rc.

The technical specifications and salient features of our range are listed below:

Powder coated
Easy on- off facility
1200 V angle also available
V blocks are available from 2 to 10 sizes
Magnetic V blocks have all sides as harden & ground magnetic v block.
For the purpose of EDM machines, leak proof magnetic V blocks are also available in various sizes

Yes! I am Interested

Magnetic Blocks

REQUEST CALLBACK

Ask for Price

Product Price :Get Latest Price

Magnetic Square Block In Pair

MRM – 700H, MRM – 900H

These blocks are designed to hold the steel components in desired fixed position during welding marking grinding etc. These are extremely useful in Tool – Room in the assembling of jigs and fixtures and are also utilized with Sine table for inspection of components. They are also used a magnetic parallels as the pair are matched with +/- 5 micron. In bigger sizes an ON – OFF switch is also provided.

Specifications:

TYPE	SIZE
MRM - 700H	100 * 70 * 70 MM
MRM - 900H	150 * 80 * 80 MM

Yes! I am Interested

Magnetic Square Block In Pair

REQUEST CALLBACK

Ask for Price

Product Price :Get Latest Price

MRM – 700, MRM – 900

Specifications:

Type	Size
MRM – 700	100 * 70 * 70 MM
MRM - 900	150 * 80 * 80 MM

The MRM – 700 H and MRM- 900 H are also available. These have the same specifications as the MRM 700 and the MM 900 but the additional lining of hardened steel plates ensures the extra wear resistibility.

Yes! I am Interested

Magnetic V Block Special For Boring Bar

REQUEST CALLBACK

Ask for Price

Product Price :Get Latest Price

These Boring tool devices are used to set boring tool to the exact diameter on boring machines and machine tools with rotation boring tools. Because of their magnetic bases, they can be held directly on boring spindle. The clamps can fit at any desired position whereby any particular bore size can be set on the device. These devices have ON / OFF switches, as per requirements and aid in holding the job on boring spindle. The ‘ V ‘ slot is ground to 5micron accuracy.

Specifications:

CAT. NO.	SIZE [L W H]	CLAMPING RANGE DIA. IN MM
[Without ON / OFF switch]
KM - BSD - 201	70 * 22 * 40 mm	10 TO 60
KM - BSD - 202	75 * 22 * 50 mm	10 TO 85
[With ON / OFF switch]
KM - BSD - 203	50 * 28 * 60 mm	10 TO 50
KM - BSD - 204	60 * 30 * 60 mm	10 TO 60
KM - BSD - 205	65 * 35 * 60 mm	10 TO 70
KM - BSD - 206	75 * 35 * 70 mm	10 TO 90
KM - BSD - 207	70 * 40 * 60 mm	15 TO 105
KM - BSD - 208	90 * 40 * 70 mm	15 TO 120
KM - BSD - 209	120 * 40 * 90 mm	15 TO 150

The V – ANGLE can be furnished in 90 degree at 120 Degree as per requirement

Yes! I am Interested

Magnetic Square Block

REQUEST CALLBACK

Ask for Price

Product Price :Get Latest Price

Magnetic Square Block With 2 V's MRM 777_MRM 999

This Magnetic Square Block with 2 V's has some special built in features, which enable smoother and easier utility: